How to Use Non-Stick Pressing Sheets for Quilting
By Madam Sew | Sewing Supplies & Tools Online – MadamSew | Published: 2026-10-19
Category: How-to Guides
Learn how to use non-stick pressing sheets to protect your iron and delicate fabrics during quilting and applique projects. Step-by-step guide with tips.
Quick Answer
Place a non-stick pressing sheet between your iron and fabric to prevent scorch marks, shine, and adhesive residue. Use it for fusible applique, delicate fabrics, and quilting blocks.
Why Use a Pressing Sheet for Quilting?
Non-stick pressing sheets act as a heat-resistant barrier that protects both your iron and your project. They prevent sticky residue from fusible webbing or interfacing from transferring to the iron soleplate, and they stop shine or burn marks on delicate or textured fabrics.
They are reusable and work with standard irons and mini irons alike. For quilters, they are especially useful when pressing fusible applique shapes, seam allowances on specialty fabrics, or finished blocks that include mixed materials.
Choosing the Right Pressing Sheet
Look for sheets that are explicitly heat-resistant and non-stick. A set of two sheets gives you a backup or lets you press larger pieces. The Madam Sew Non-Stick Pressing Sheets 2 pcs are a budget-friendly option that protects against heat damage and residue without sticking to your iron or fabric.
Step-by-Step: How to Use Non-Stick Pressing Sheets for Quilting
- Step 1: Preheat Your Iron: Set your iron to the temperature appropriate for your fabric. Most non-stick sheets handle cotton and polyester settings well, but check the sheet's heat rating if available. Avoid using the highest steam setting, as excess moisture can pool on the sheet.
- Step 2: Position the Pressing Sheet: Place the non-stick sheet directly over your fabric or applique piece on the ironing board. Make sure the sheet covers the entire area you plan to press. Do not place the sheet under the fabric—it goes on top to protect the iron and prevent shine.
- Step 3: Press, Don't Slide: Lower the iron onto the sheet and press firmly for 5-10 seconds. Lift the iron straight up before moving to the next section. Avoid sliding the iron across the sheet, which can shift your fabric. Sliding can cause the fabric or fusible shapes to shift out of place, especially with lightweight materials.
- Step 4: Check and Repeat if Needed: Lift the sheet and check the bond or pressed area. If the fusible hasn't fully adhered, reposition the sheet and press again for a few more seconds. Let the fabric cool slightly before repositioning to avoid distorting the fibers.
- Step 5: Clean the Sheet After Use: Allow the sheet to cool completely, then wipe it with a damp cloth or mild soap if residue remains. Store it flat or rolled to prevent creases. Never use abrasive scrubbers—they can scratch the non-stick surface and reduce its effectiveness.
Product Used in This Guide
- Non-Stick Pressing Sheets 2 pcs - Protect your Iron & Fabrics: A heat resistant, and reusable Non-Stick Sheet will act as a protective heat barrier between your hot iron and your fabrics or applique during any sewing, quilting or crafting project. This means you can press fusible webbing and delicate fabrics without worrying about sticky residue or heat damage to your iron or project.
Non-Stick Pressing Sheets 2 pcs - Protect your Iron & Fabrics
